The application of the hydraulic press is mentioned in the introductory part. A four-column hydraulic press is suitable for straightening, pressing, assembling and disassembling parts, compacting and pulling out bushings, and in other types of machining where high force is required on a small path to perform a particular job. The basic concept of operation of hydrostatic machines and systems is based on Pascal's law. The main advantage of hydraulics is the ability to achieve great forces. The main disadvantage of hydraulics is the sensitivity to impurities. The second point describes all the parts used in the construction of the hydraulic press. Production is described for each part. In the calculation of basic elements, the calculation of shear stress on bolts and calculation of transverse beams for bending were performed. From the calculation it can be concluded that the bolts can withstand the shear stress. It can also be seen from the calculation that the U profiles and connecting plates are loaded below allowable bending stress. The technical documentation consists of twelve drawings, eleven manufacturing and one assembly drawing. Drawings are attached in the paper. The last point of this paper is the conclusion in which the whole paper is briefly described and a review of key units is made.