prikaz prve stranice dokumenta RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021
Access restricted to students and staff of home institution
undergraduate thesis
RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021
2021. urn:nbn:hr:262:465090
Drmić, Marko
University of Slavonski Brod

Cite this document

Drmić, M. (2021). RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021 (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:465090

Drmić, Marko. "RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:465090

Drmić, Marko. "RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:465090

Drmić, M. (2021). 'RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021', Undergraduate thesis, University of Slavonski Brod, accessed 16 November 2024, https://urn.nsk.hr/urn:nbn:hr:262:465090

Drmić M. RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021 [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 November 16] Available at: https://urn.nsk.hr/urn:nbn:hr:262:465090

M. Drmić, "RAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:465090

Please login to the repository to save this object to your list.
Metadata
TitleRAZVOJ PROTOTIPA VIJČANE PREŠE POGONJENE SERVO MOTORIMA PREMA TEHNIČKOM CRTEŽU PD_MD_2021
Title (english)DEVELOPMENT OF SCREW PRESS RUN BY ELECTRIC SERVO MOTORS FROM TECHNICAL DRAWING PD_MD_2021
AuthorMarko Drmić
MentorJosip Cumin (mentor)
Committee memberJosip Stojšić (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2021-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom dijelu rada opisane su preše, njihova namjena, podjela i način rada. Naziv ovog rada je „Razvoj prototipa vijčane preše sa servomotorima prema tehničkim crtežima“ što znači da je ostatak rada baziran na pronalasku najboljeg rješenja i izvedbe za izradu prototipa preše. U točki razmatranje varijantnih rješenja koncepta prikazane su razne izvedbe preše te odabrana je optimalna izvedba po kojoj je napravljen proračun. U točki proračun i odabir standardnih elemenata preše prikazani su proračuni na osnovna naprezanja (tlačno i torzijsko) te reducirano naprezanje koje mora biti unutar granica dozvoljenog, obavljen je još i proračun vijaka na odrez te utvrđeno da svaki vijak može podnijeti zadano opterećenje. Sustav za monitoring sile i upravljanje se obavlja pomoću lineranog enkodera „VM-600-2“ koji ovoj preši ima ulogu „mjerenja pozicije“. Tehnička dokumentacija se sastoji od osam crteža (7 radiončkih i 1 sastavni crtež) koji se nalaze u prilogu. Zadnja točka ovog rada je zaključak u kojem je ukratko opisan cijeli rad te napravljen osvrt na ključne cjeline.
Abstract (english)
The title of this paper is "Development of a screw press prototype with servomotors according to technical drawings", which means that the rest of the paper is based on finding the best solution and performance for making a press prototype. In the "Considering variant solutions of the concept" point, we consider various press designs and select the optimal design according to which we perform the calculation. In the "Calculation and selection of standard elements of the press" point, we perform calculations on basic stresses (compressive and torsional) and reduced stress that must be within the allowable limits. The calculation of cut screws was also performed and it was determined that each screw can withstand a given load. The force monitoring and control system is performed using a linear encoder "VM-600-2" which has the role of "reading position" for this press. The technical documentation consists of eight drawings (7 workshop and 1 component drawing) which are attached. The last point of this paper is the conclusion in which the whole paper is briefly described and a review of key units is made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:465090
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-28 07:49:28