prikaz prve stranice dokumenta CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA
Access restricted to students and staff of home institution
master's thesis
CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA
2021. urn:nbn:hr:262:804142
Palla, Juraj
University of Slavonski Brod

Cite this document

Palla, J. (2021). CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:804142

Palla, Juraj. "CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA." Master's thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:804142

Palla, Juraj. "CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA." Master's thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:804142

Palla, J. (2021). 'CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA', Master's thesis, University of Slavonski Brod, accessed 28 October 2024, https://urn.nsk.hr/urn:nbn:hr:262:804142

Palla J. CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 October 28] Available at: https://urn.nsk.hr/urn:nbn:hr:262:804142

J. Palla, "CFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:804142

Please login to the repository to save this object to your list.
Metadata
TitleCFD ANALIZA STRUJANJA ZRAKA OKO ROTORA VJETROTURBINE SNAGE 1 kW DEFINIRANE WORTMANNOVIM AEROPROFILIMA
Title (english)CFD ANALYSIS OF AIR FLOW AROUND THE ROTOR OF A 1 kW WORTMANN WINDTURBINE
AuthorJuraj Palla
MentorMarija Živić (mentor)
Committee memberMarinko Stojkov (predsjednik povjerenstva)
Committee memberMarija Živić (član povjerenstva)
Committee memberKatica Šimunović (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2021-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu je provedena CFD analiza strujanja zraka oko rotora vjetroturbine snage 1 kW koja je oblikovana Wortmannovim aeroprofilima. Nakon analize strujanja zraka oko rotora, napravljena je usporedba s vjetroturbinom koja je izrađena od Althausovih aeroprofila čija je autorica kolegica Mihaela Erceg. Ograničenja koja su postavljena autoru su snaga rotora vjetroturbine koja mora biti 1 kW i aeroprofili koji moraju biti oznake Wortmann. Uzimajući u obzir ograničenja, kreće se u prelimirarnu fazu osnivanja i razvoja vjetroturbine iz koje se oblikuje geometrija konačnog seta aeroprofila. Sljedeća faza je oblikovanje geometrije u odgovarajućem softveru platforme Ansys. Zatim slijedi generiranje mreže vodeći računa o graničnom sloju. Nakon svega slijedi CFD simulacija u rješavaču Fluent na temelju čijih rezultata se vrši usporedba polja fizikalnih veličina kod dvije različite vjetroturbine i donosi se konačan zaključak po pitanju efikasnosti. Na kraju su navedeni prijedlozi za poboljšanje procesa osnivanja i razvitka vjetroturbine.
Abstract (english)
In this master’s thesis, a CFD analysis of wind flow around 1 kW wind turbine rotor defined by Wortmann airofils was conducted. After wind flow analysis around wind turbine rotor, a comparison was made with the windturbine that was made of Althaus airfoils whose author is a colleague Mihaela Erceg. Limits set up upon author were the power of a windturbine rotor which is 1 kW and airfoils which must be a Wortmann brand. Regarding the limits, the development starts with the preliminary phase of establishing and developing windturbine which is a start point for modelling the final set of airfoils. Next step is modelling geometry in a certain software of the platform Ansys. Next comes mesh generation taking into account boundary layer. After all, next comes CFD simulation in solver Fluent whose results are used to compare field of physical quantities for two different windturbines and a final conclusion is made regarding wind turbine efficiency. Lastly, suggestions for improvement have been made for the process of founding and developing windturbine.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:804142
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-09-16 06:49:34