prikaz prve stranice dokumenta PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA
Access restricted to students and staff of home institution
master's thesis
PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA
2024. urn:nbn:hr:262:615357
Vidačić, Marin
University of Slavonski Brod

Cite this document

Vidačić, M. (2024). PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:615357

Vidačić, Marin. "PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA." Master's thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:615357

Vidačić, Marin. "PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA." Master's thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:615357

Vidačić, M. (2024). 'PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA', Master's thesis, University of Slavonski Brod, accessed 27 October 2024, https://urn.nsk.hr/urn:nbn:hr:262:615357

Vidačić M. PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2024 [cited 2024 October 27] Available at: https://urn.nsk.hr/urn:nbn:hr:262:615357

M. Vidačić, "PRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:262:615357

Please login to the repository to save this object to your list.
Metadata
TitlePRIMJENA TIG+MIG HIBRID PROCESA ZAVARIVANJA
Title (english)APPLICATION OF TIG+MIG HYBRID WELDING PROCESS
AuthorMarin Vidačić
MentorDejan Marić (mentor)
Committee memberMiroslav Duspara (predsjednik povjerenstva)
Committee memberDejan Marić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2024-07-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodu diplomskog rada opisani su pojedini hibridni postupci zavarivanja, zašto se oni koriste i koje su njihove prednosti i mane. U trećem poglavlju je opisan MIG postupak zavarivanja, oprema koja je potrebna za MIG postupak zavarivanja, prednosti i mane ovog postupka, gdje se koristi ovaj postupak. U četvrtom poglavlju je opisan TIG postupak zavarivanja, oprema koja je potrebna za TIG postupak zavarivanja, prednosti i mane ovog postupka, gdje se koristi ovaj postupak. U petom poglavlju je opisan TIG+MIG hibridni postupak zavarivanja, prednosti i mane ovog hibridnog postupka i parametri koji su važni za ovaj postupak zavarivanja. U šestom poglavlju je napravljen eksperiment, kombinacijom TIG+MIG postupaka zavarivanja navarivan je konstrukcijski čelik, prikazani su rezultati ZUT i ZT, prikazana je tvrdoća na pojedinim dijelovima ispitnih rezultata i prikazan je postotak delta ferita u ispitnim uzorcima.
Abstract (english)
The introduction of the thesis describes various hybrid welding processes, why they are used, and their advantages and disadvantages. Chapter three discusses the MIG welding process, the equipment required for MIG welding, the advantages and disadvantages of this process, and its applications. Chapter four describes the TIG welding process, the equipment required for TIG welding, the advantages and disadvantages of this process, and its applications. Chapter five describes the TIG+MIG hybrid welding process, the advantages and disadvantages of this hybrid process, and the parameters important for this welding process. Chapter six presents an experiment where structural steel was welded using a combination of TIG and MIG welding processes. The results of Heat Affected Zone (HAZ) and Fusion Zone (FZ), hardness at specific parts of the test results, and the percentage of delta ferrite in the test samples are shown.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:615357
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-07-05 06:24:19