prikaz prve stranice dokumenta PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001
Access restricted to students and staff of home institution
undergraduate thesis
PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001
2023. urn:nbn:hr:262:088934
Desić, Luka
University of Slavonski Brod
Department of Engineering

Cite this document

Desić, L. (2023). PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001 (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:088934

Desić, Luka. "PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001." Undergraduate thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:088934

Desić, Luka. "PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001." Undergraduate thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:088934

Desić, L. (2023). 'PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001', Undergraduate thesis, University of Slavonski Brod, accessed 19 April 2024, https://urn.nsk.hr/urn:nbn:hr:262:088934

Desić L. PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001 [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2023 [cited 2024 April 19] Available at: https://urn.nsk.hr/urn:nbn:hr:262:088934

L. Desić, "PROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:262:088934

Please login to the repository to save this object to your list.
Metadata
TitlePROJEKTIRANJE TEHNOLOGIJE ZAVARIVANJE PREMA CRTEŽU TO-MD-2023-001
Title (english)DESIGN OF WELDING TECHNOLOGY ACCORDING TO DRAWING TO-MD-2023-001
AuthorLuka Desić
MentorMarko Dunđer (mentor)
Committee memberDejan Marić (predsjednik povjerenstva)
Committee memberMarko Dunđer (član povjerenstva)
Committee memberIvan Samardžić (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2023-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu provedena je analiza grešaka nakon zavarivanja kompenzatora na spoju harmonike i cijevi. Rad se sastoji od teorijskog i eksperimentalnog dijela. U teorijskom dijelu rada sam opisali materijale od kojih se sastoji kompenzator te naveo njihov kemijski sastav mehanička svojstva te gdje se primjenjuju. Još sam naveo kojim se zavarivačkim tehnikama zavaruje kompenzator te slijed proizvodnih i kontrolnih aktivnosti koje se provode pri proizvodnji kompenzatora. U eksperimentalnom dijelu rada su prikazani koraci koje smo provodili tijekom rada kako bi došli do saznanja o greškama a to je priprema uzorka za metalografsku analizu. Priprema se sastoji od izrezivanja uzorka koje smo provodili ručnom brusilicom zatim smo uzorke brusili kako bi došli do glatke površine te smo ih na kraju nagrizali kako bi uočili greške. Analiza je provedena na četiri uzorka te se na sva četiri uzorka provodila priprema. Na kraju rada su navedeni rezultati koje smo dobili analizom.
Abstract (english)
In this paper, an analysis of errors after welding of the compensator at the joint of the accordion and the pipe was carried out. The paper consists of a theoretical and an experimental part. In the theoretical part of the paper, I described the materials that make up the compensator and stated their chemical composition, mechanical properties, and where they are used. I have also stated which welding techniques are used to weld the compensator and the sequence of production and control activities that are carried out during the production of the compensator. The experimental part of the work shows the steps we carried out during the work in order to find out about the errors, which is the preparation of the sample for metallographic analysis. The preparation consists of cutting out the sample, which we carried out with a manual sander, then we sanded the samples to reach a smooth surface, and finally we etched them in order to spot flaws. The analysis was carried out on four samples and preparation was carried out on all four samples. At the end of the paper, the results obtained from the analysis are listed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:088934
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-09-20 11:24:43