prikaz prve stranice dokumenta TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA
Access restricted to students and staff of home institution
master's thesis
TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA
2022. urn:nbn:hr:262:154938
Milikšić, Zoran
University of Slavonski Brod

Cite this document

Milikšić, Z. (2022). TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:154938

Milikšić, Zoran. "TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:154938

Milikšić, Zoran. "TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:154938

Milikšić, Z. (2022). 'TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA', Master's thesis, University of Slavonski Brod, accessed 30 October 2024, https://urn.nsk.hr/urn:nbn:hr:262:154938

Milikšić Z. TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2022 [cited 2024 October 30] Available at: https://urn.nsk.hr/urn:nbn:hr:262:154938

Z. Milikšić, "TEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:262:154938

Please login to the repository to save this object to your list.
Metadata
TitleTEHNOEKONOMSKE ZNAČAJKE BRZE IZRADE MODELA RAZLIČITIM POSTUPCIMA ADITIVNIH TEHNOLOGIJA
Title (english)TECHNOECONOMICL FEATURES OF RAPID PROTOTYPING BY DIFFERENT ADDITIVE TECHNOLOGY PROCESSES
AuthorZoran Milikšić
MentorIlija Svalina (mentor)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberIlija Svalina (član povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2022-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu prikazan je povijesni razvoj aditivnih tehnologija te je opisan princip funkcioniranja svake pojedine aditivne tehnologije uz navedene prednosti i nedostatke. Nadalje nakon toga slijedio je opis programa za modeliranje Inventor, te opis modeliranja modela koji će se printati na 3D printerima. Nakon toga u idućem poglavlju opisani su programi za pripremu 3D printanja koji su korišteni te je napravljena i opisana priprema modela za printanje u istim tim programima. Slijedeći opis odnosio se na 3D printere koji su korišteni, a poslije toga opisan je tok izrade modela na tim uređajima. Na kraju rada vršila se usporedba modela izrađenih na različitim 3D printerima s naglaskom na tehnoekonomske značajke, ta usporedba doprinijela je donošenju zaključaka o postignutim analiziranim značajkama svakog od korištenih 3D printera.
Abstract (english)
The paper presents the historical development of additive technologies and describes the principle of functioning of each additive technology with the stated advantages and disadvantages. This was followed by a description of the Inventor modeling program, and a description of the modeling model that will be printed on 3D printers. After that, the next chapter describes the programs for the preparation of 3D printing that were used, and the preparation of the model for printing in the same programs was made and described. The following description referred to the 3D printers used, followed by the process of making models on these devices. At the end of the paper, a comparison of models made on different 3D printers with an emphasis on techno-economic features was made, and this comparison contributed to drawing conclusions about the achieved analyzed features of each of the used 3D printers.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:154938
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-07-15 07:42:46