prikaz prve stranice dokumenta CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE
Access restricted to students and staff of home institution
master's thesis
CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE
2021. urn:nbn:hr:262:368856
Jurkić, Josip
University of Slavonski Brod

Cite this document

Jurkić, J. (2021). CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:368856

Jurkić, Josip. "CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE." Master's thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:368856

Jurkić, Josip. "CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE." Master's thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:368856

Jurkić, J. (2021). 'CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE', Master's thesis, University of Slavonski Brod, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:262:368856

Jurkić J. CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:262:368856

J. Jurkić, "CFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:368856

Please login to the repository to save this object to your list.
Metadata
TitleCFD ANALIZA OPTJECANJA ZRAKA OKO ROTORA VJETROTURBINE NAZIVNE SNAGE 200 W I IZRADA 3D MODELA ROTORA PRIMJENOM RAPID PROTOTYPING TEHNOLOGIJE
Title (english)CFD ANALYSIS OF AIR FLOW AROUND WIND TURBINE ROTOR OF NOMINAL POWER 200 W
AuthorJosip Jurkić
MentorMarija Živić (mentor)
Committee memberMarinko Stojkov (predsjednik povjerenstva)
Committee memberMarija Živić (član povjerenstva)
Committee memberMario Holik (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2021-12-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U okviru ovog diplomskog rada su provedene 4 faze procesa razvoja mikro vjetroturbine nazivne snage 200 W: preliminarno projektiranje, izrada 3D CAD modela rotora vjetroturbine, CFD simulacije optjecanja zrakom rotora vjetroturbine, te 3D ispis prototipa rotora vjetroturbine primjenom rapid prototyping tehnologije. Peta faza razvojnog procesa, FEM analiza naprezanja, deformacija i životnog vijeka strukture rotora vjetroturbine, nije predmet ovog diplomskog rada. Preliminarnim proračunom su dobivene vrijednosti osnovnih geometrijskih karakteristika vjetroturbine na osnovi kojih je izgrađen 3D CAD model rotora vjetroturbine. Za potrebe CFD simulacije optjecanja rotora, oko 3D modela rotora izgrađena računska domena, a potom je unutar računske domene generirana mreža konačnih volumena. Nakon toga su relativno brzo, uz vrlo dobru konvergenciju (postizanjem, po svim kriterijima konvergencija, reziduala od 10-3 i 10-6), provedena CFD simulacija, koja je kao rezultat pokazala polja tlaka i brzine unutar zadane računske domene i po površini same lopatice rotora, te numerički iznos snage ove vjetroturbine. Na kraju se primjenom rapid prototyping tehnologije, pomoću 3D pisača, ispisao 3D prototip vjetroturbine.
Abstract (english)
Within this master thesis, 4 phases of the development process of a micro wind turbine with a nominal power of 200 W were carried out: preliminary design, development of a 3D CAD model of a wind turbine rotor, CFD simulation of air circulation of a wind turbine rotor, and 3D printing of a prototype of the wind turbine rotor using the rapid prototyping technology. The fifth phase of the development process, FEM analysis of stresses, deformations and service life of the wind turbine rotor structure, is not the subject of this thesis. Preliminary calculations obtained the values of the basic geometric characteristics of the wind turbine on the basis of which the 3D CAD model of the wind turbine rotor was built. For the purposes of a CFD simulation of airflow around the rotor, a computational domain was built around the 3D model of the rotor, and then a network of finite volumes was generated within the computational domain. After that, the CFD simulations were performed relatively quickly, with very good convergence (achieving, by all convergence criteria, residuals of 10-3 and 10-6), which resulted in the pressure and velocity fields within the given computational domain and on the surface of the rotor blade itself, as well as the numerical amount of power of this wind turbine. Finally, with the use of a 3D printer and rapid prototyping technology, a 3D prototype of the wind turbine was printed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:368856
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Power Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-01-12 08:47:26