prikaz prve stranice dokumenta MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI
Access restricted to students and staff of home institution
master's thesis
MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI
2024. urn:nbn:hr:262:190763
Srbalj, Mihael
University of Slavonski Brod

Cite this document

Srbalj, M. (2024). MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:190763

Srbalj, Mihael. "MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI." Master's thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:190763

Srbalj, Mihael. "MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI." Master's thesis, University of Slavonski Brod, 2024. https://urn.nsk.hr/urn:nbn:hr:262:190763

Srbalj, M. (2024). 'MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI', Master's thesis, University of Slavonski Brod, accessed 10 May 2024, https://urn.nsk.hr/urn:nbn:hr:262:190763

Srbalj M. MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2024 [cited 2024 May 10] Available at: https://urn.nsk.hr/urn:nbn:hr:262:190763

M. Srbalj, "MEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:262:190763

Please login to the repository to save this object to your list.
Metadata
TitleMEHANIČKA SVOJSTVA ČELIČNIH DIJELOVA U IZRADI DRVENIH BAČVI
AuthorMihael Srbalj
MentorVlatko Marušić (mentor)
Committee memberAndrijana Milinović (predsjednik povjerenstva)
Committee memberVlatko Marušić (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2024-04-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je detaljno objašnjena tehnologija izrade drvenih bačvi. Analizirane su specifičnosti proizvodnje bačvi, kao i problematika koja se javlja tijekom toga. Ukratko je spomenuta povijest bačvarenja te su povučene paralele između bačvaranja nekada i sada. Glavni fokus je stavljen na metalne obruče bačvi. Provedena su ispitivanja zakovica, zakovanog spoja i lima, od kojih se obruč sastoji. Provedena su sljedeća ispitivanja: ispitivanje tvrdoće Brinellovom i Vickersovom metodom, metalografska ispitivanja te statičko vlačno ispitivanje. Nakon provedenih ispitivanja u eksperimentalnom dijelu rada izvršena je i kratka analiza dobivenih rezultata. Provedena ispitivanja su potvrdila dobru kvalitetu materijala te je utvđena tvrdoća zakovica i limova. Također, provedenim ispitivanjima došlo se do zaključka da su za upotrebu na obručima kvalitetnije zakovice 8x12 mm, nego zakovice 6x12 mm.
Abstract (english)
In this paper, the technology of making wooden barrels is explained in detail. The specifics of the production of barrels, as well as the problems that arise during it, are analyzed. The history of cooperage was briefly mentioned and parallels were drawn between cooperage then and now. The main focus is placed on the metal hoops of the barrels. Tests were carried out on the rivets, the riveted joint and the sheet that makes up the ring. The tests that were carried out were hardness tests using the Brinell and Vickers methods, metallographic tests and static tensile tests. After the tests in the experimental part, a short analysis of the obtained results was performed. The conducted tests confirmed the good quality of the material and the hardness of the rivets and sheets was determined. The tests also carried out led to the conclusion that 8x12 mm rivets are better for use on barell hoops than 6x12 mm rivets.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:190763
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Materials Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-04-22 08:35:43