prikaz prve stranice dokumenta ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM
Access restricted to students and staff of home institution
master's thesis
ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM
2023. urn:nbn:hr:262:698935
Siroglavić, Matej
University of Slavonski Brod

Cite this document

Siroglavić, M. (2023). ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:698935

Siroglavić, Matej. "ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM." Master's thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:698935

Siroglavić, Matej. "ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM." Master's thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:698935

Siroglavić, M. (2023). 'ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM', Master's thesis, University of Slavonski Brod, accessed 10 May 2024, https://urn.nsk.hr/urn:nbn:hr:262:698935

Siroglavić M. ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2023 [cited 2024 May 10] Available at: https://urn.nsk.hr/urn:nbn:hr:262:698935

M. Siroglavić, "ANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:262:698935

Please login to the repository to save this object to your list.
Metadata
TitleANALIZA PARAMETARA ZAVARIVANJA PRAŠKOM PUNJENOM ŽICOM
Title (english)ANALYSIS OF FLUX CORED WIRE WELDING PARAMETERS
AuthorMatej Siroglavić
MentorMarko Dunđer (mentor)
Committee memberMiroslav Duspara (predsjednik povjerenstva)
Committee memberMarko Dunđer (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2023-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Diplomski rad sastavljen je od dva dijela, teorijskog i eksperimentalnog. Tema rada je: Analiza parametara zavarivanja praškom punjenom žicom. Prvi dio rada, odnosno teorijski dio sastavljen je od dva poglavlja. Prvo poglavlje je Uvod i Općenito o zavarivanju praškom punjenom žicom. Opisana je podjela postupaka, proces postupaka zavarivanja praškom punjenom žicom i MIG/MAG postupka zavarivanja kako bi se vidjele sličnosti i razlike, opisani su zaštitni plinovi, te utjecaj različitih promjenjivih veličina na proces zavarivanja. Na kraju su navedene praškom punjene žice, te greške koje mogu nastati pri zavarivanju. Eksperimentalni dio rada smješten je u drugom poglavlju, gdje je prikazana i opisana robotska stanica za zavarivanje i izrada uzoraka. Nadalje, analiza rezultata nalazi se u trećem poglavlju, a četvrto poglavlje, ujedno i posljednje predstavlja Zaključak rada.
Abstract (english)
The thesis consists of two parts, theoretical and experimental. The topic of the paper is the analysis of welding parameters of powder-filled wire. The first part of paper, theoretical part, consists of two chapters. The first chapter is an introduction and general about welding with powder-filled wire. The division of procedures, the welding process with powder-filled wire and the MIG/MAG welding process are described in order to observe similarities and differences, shielding gases are described, and the influence of various variables on the welding process. At the end, powder-filled wires and errors that may occur during welding are listed. The experimental part of the work can be found in the second chapter, where the robot station for welding and making samples is shown and described. Furthermore, the analysis of the results can be found in the third chapter, and the fourth chapter, which is also the last, brings the conclusion of the work.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:698935
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-10-04 10:05:56