prikaz prve stranice dokumenta KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA
Access restricted to students and staff of home institution
master's thesis
KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA
2023. urn:nbn:hr:262:876600
Vukašinović, Josip
University of Slavonski Brod

Cite this document

Vukašinović, J. (2023). KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:876600

Vukašinović, Josip. "KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA." Master's thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:876600

Vukašinović, Josip. "KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA." Master's thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:876600

Vukašinović, J. (2023). 'KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA', Master's thesis, University of Slavonski Brod, accessed 16 November 2024, https://urn.nsk.hr/urn:nbn:hr:262:876600

Vukašinović J. KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2023 [cited 2024 November 16] Available at: https://urn.nsk.hr/urn:nbn:hr:262:876600

J. Vukašinović, "KONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:262:876600

Please login to the repository to save this object to your list.
Metadata
TitleKONSTRUKCIJSKI RAZVOJ I IZRADA TEHNIČKOG SUSTAVA ZA IZRADU RIBOLOVNIH MAMACA
Title (english)STRUCTURAL DEVELOPMENT AND PRODUCTION OF A TECHNICAL SYSTEM FOR THE PRODUCTION OF FISHING BAITS
AuthorJosip Vukašinović
MentorŽeljko Ivandić (mentor)
Committee memberLeon Maglić (predsjednik povjerenstva)
Committee memberŽeljko Ivandić (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2023-07-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog rada je provesti konstrukcijski razvoj i izraditi tehnički sustava za izradu ribolovnih mamaca (boila). Objašnjen je cjelokupni proces nastanka proizvoda od ideje pa do prototipa. Zapaženim prednostima i nedostacima na postojećim rješenjima definirana je lista zahtjeva, te u konačnici morfološka matrica. Konstrukcijski razvoj (modeliranje) tehničkog sustava za izradu ribolovnih boila odrađen je u programu NX-12, a tehnički crteži su pripremljeni u programu Auto-CAD. Programom Arduino omogućeno je kretanje dvaju mehaničkih klipova kojima upravlja senzor. G-COD namijenjen 3D ispisu nekoliko pozicija stvoren je u programu Ultimaker Cura. Izrada tehničkog sustava za izradu ribolovnih boila započeta je savijanjem limova od nehrđajućeg čelika koji su prethodno rezani laserom. Printani dijelovi izrađeni su na printeru Creality Ender 3, dok su vratila, među-osovine i ručke izrađeni na tokarilicama i glodalicama. Komponente su spajane zavarivanjem, vijčano i lemljenjem.
Abstract (english)
The aim of this pappe is to carry out structural development and create a technical system for the production of fishing baits (boilies). The entire process of product creation, from the idea to the prototype, is explained. A list of requirements, and ultimately a morphological matrix, was defined by the observed advantages and disadvantages of the existing solutions. The structural development (modeling) of the technical system for making fishing boilies was done in the NX-12 program, and the technical drawings were prepared in the Auto-CAD program. The Arduino program enables the movement of two mechanical pistons controlled by the sensor. The G-COD intended for 3D printing of several positions was created in the Ultimaker Cura program. The production of the technical system for the production of fishing boilies was started by bending stainless steel sheets that were previously cut by laser. The printed parts were made on a Creality Ender 3 printer, while the shafts, intermediate shafts and handles were made on lathes and milling machines. The components are joined by welding, screwing and soldering.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:876600
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-07-25 08:41:50