prikaz prve stranice dokumenta Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022
Access restricted to students and staff of home institution
master's thesis
Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022
2022. urn:nbn:hr:262:846225
Stahović, Robert
University of Slavonski Brod

Cite this document

Stahović, R. (2022). Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022 (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:846225

Stahović, Robert. "Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:846225

Stahović, Robert. "Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:846225

Stahović, R. (2022). 'Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022', Master's thesis, University of Slavonski Brod, accessed 15 November 2024, https://urn.nsk.hr/urn:nbn:hr:262:846225

Stahović R. Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022 [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2022 [cited 2024 November 15] Available at: https://urn.nsk.hr/urn:nbn:hr:262:846225

R. Stahović, "Računalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:262:846225

Please login to the repository to save this object to your list.
Metadata
TitleRačunalom podržano projektiranje tehnološkog procesa za izradu osovine oznake SF 2022
Title (english)Computer-aided process planinng for the production of the SF 2022 axis
AuthorRobert Stahović
MentorGoran Šimunović (mentor)
Committee memberTomislav Šarić (predsjednik povjerenstva)
Committee memberGoran Šimunović (član povjerenstva)
Committee memberRoberto Lujić (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2022-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Nakon uvoda, prezentirana je raspoloživost, dostupnost i zastupljenost CAM softvera na tržištu. Detaljnije je opisan je izabrani CAM softver za projektiranje tehnološkog procesa za izradu osovine SF 2022. Navedene su njegove prednosti i nedostaci te njegova zastupljenost i primjena na tržištu. U praktičnom dijelu diplomskog rada sustavno je opisan rad u programskom softveru Siemens NX 12.0 - od postupka modeliranja radnog predmeta (osovine do postupka projektiranja tehnološkog procesa za radni predmet. Detaljno je opisano modeliranje radnog predmeta, kasnije izbor polaznog materijala, definiranje pripadajućih tehnoloških operacija, izbora alata i režima obrade. Nakon pripreme za izradu tehnološkog procesa za osovinu, softver NX 12.0. generira G kod. Uslijedila je simulacija koja ukazuje na potencijalne kolizije, generiranje dokumentacije i analiza tehnološkog procesa.
Abstract (english)
After the introduction, the availability, accessibility and representation of CAM software on the market was presented. The selected CAM software for designing the technological process for the production of the SF 2022 axle is described in more detail. Its advantages and disadvantages, as well as its representation and application on the market, are listed. In the practical part of the diploma thesis, the work in the Siemens NX 12.0 software is systematically described - from the process of modeling the workpiece (shafts to the process of designing the technological process for the workpiece. The modeling of the workpiece, later the selection of the starting material, the definition of the associated technological operations, the selection tools and processing regimes. After preparing to create a technological process for the shaft, the software NX 12.0. generates G code. This was followed by a simulation indicating potential collisions, generation of documentation and analysis of the technological process.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:846225
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-11 09:32:20